Country / region: Germany
Edmund Bühler supplies laboratory shakers and materials-science equipment. Labsun is its exclusive distributor in China.
Edmund Bühler is a long-established German manufacturer of laboratory and materials-science equipment focused on dependable workflows.
Its portfolio includes orbital, horizontal and incubation shakers, homogenisation and temperature-control accessories, plus equipment for melting, alloying, casting, rapid quenching and heat treatment.
The equipment supports sample mixing, cell culture, laboratory preparation, materials development and metal research.
As Edmund Bühler’s exclusive distributor in China, Labsun provides selection, system configuration, documentation, training and after-sales support.
Designed for cell-culture mixing inside CO₂ incubators, with a stainless-steel body suitable for up to 20% CO₂ and 95% humidity; the KM CO₂-FL uses a ribbon…
View product detailsCompact orbital shakers with a 200 × 295 mm platform and a 2 kg load capacity; the KM 2 Akku provides at least 40 hours of…
View product detailsCombines gentle tilting and rolling motion for uniform mixing in tubes and small vessels, making it suitable for continuous, low-shear sample handling.
View product detailsA compact shaker for small-volume microplate samples, holding four plates and providing fast, uniform orbital mixing with a 3 mm stroke.
View product detailsProvides slow three-dimensional motion with an adjustable 0°–9° tilt angle, a 1–23 rpm speed range and a 10 kg load capacity on a 340 × 340…
View product detailsUses a slow linear rocking motion with a fixed 5° tilt, a 1–23 rpm speed range and a 10 kg load capacity on a 340 ×…
View product detailsA dual-action shaker that switches between orbital and horizontal reciprocating motion, allowing the mixing method to be matched to the sample and vessel.
View product detailsCompact shakers with a 15 kg load capacity: KS 15 A provides orbital motion, while KS 15 B provides horizontal reciprocating motion for reliable daily mixing.
View product detailsTouchscreen, programmable compact shakers for reproducible workflows; KS 15 A control is orbital and KS 15 B control is horizontally reciprocating, both with a 15 kg…
View product detailsOrbital mixing of small-volume microplate samples; optional rack systems accommodate 8–48 plates, with a maximum load of 5 kg.
View product detailsOrbital mixing of small-volume microplate samples; optional rack systems accommodate 8–48 plates, with a maximum load of 5 kg. The control version adds a touch display…
View product detailsUniversal shakers for loads up to 30 kg: SM 30 A is orbital, B is horizontally reciprocating and C switches between both motions for heavy loads…
View product detailsProgrammable 30 kg universal shakers with touchscreen control; A, B and C provide orbital, reciprocating and switchable dual motion for repeatable processes.
View product detailsCombines a heating plate, touchscreen and programmable control with orbital motion for simultaneous heating and mixing of loads up to 25 kg.
View product detailsHorizontal reciprocating shaker for gushing tests; dedicated racks hold six 0.33 L or 0.5 L bottles per tier, with rack tiers and the 50 mm stroke…
View product detailsProvides a controlled chamber from 5°C above ambient to 50°C, for use with KS 15 or TiMix 5 shakers or as a standalone unit, with clearance…
View product detailsProvides a large controlled chamber from 5°C above ambient to 50°C for SM 30 shakers or standalone use, with clearance for 2000 mL flasks plus standard…
View product detailsFloor-standing heavy-duty shakers for loads up to 75 kg; VKS 75 A control is orbital and VKS 75 B control is horizontally reciprocating, both with touchscreen…
View product detailsA floor-standing heavy-duty barrel shaker for loads up to 75 kg, with rack options for horizontal or vertical drums up to 80 L and touchscreen programming.
View product detailsA programmable horizontal reciprocating shaker for up to 36 champagne bottles or similarly sized bottles when fitted with the dedicated rack, with a maximum load of…
View product detailsA compact infrared heater with a 60 × 60 mm heating area for rapid, flame-free sample heating up to 700°C.
View product detailsA compact infrared heater with integrated power control and a 100 × 100 mm heating area for rapid, flame-free heating up to 900°C.
View product detailsSix independently operated and controlled 60 × 60 mm infrared heating positions enable parallel, flame-free sample heating up to 700°C.
View product detailsA compact arc melter for approximately 5–20 g metal samples at temperatures up to 3500°C; its small chamber enables fast evacuation and low process-gas consumption.
View product detailsA glovebox arc melter for handling and alloying approximately 5–20 g oxygen-sensitive samples under inert atmosphere, with the chamber and movable electrode inside the glovebox.
View product detailsAn arc-melting system for metal samples up to approximately 200 g and 3500°C, with a water-cooled copper crucible plate, high-vacuum chamber and movable tungsten electrode.
View product detailsAn arc-melting system for metal samples up to approximately 500 g and 3500 °C, with a water-cooled double-wall high-vacuum chamber, multi-purpose crucible plate and powered lift.
View product detailsAn automated arc-melting and casting system for melting up to 500 g and casting up to 300 g, with PLC touchscreen control of evacuation, flushing, safety…
View product detailsA laboratory melt spinner for 5 g or 10 g batches, with a 200 mm copper wheel, automatic crucible positioning and high-vacuum system for rapid-solidification ribbon…
View product detailsA melt-spinning system for batches up to 60 g, with a 250 mm copper wheel, adjustable ejection angle and automatic crucible positioning for process optimization.
View product detailsUses a horizontal copper-wheel process to produce metal microfibers and spiral ribbons from batches up to 60 g, with automatic vertical crucible positioning and fiber collection.
View product detailsSemi-automated melt spinner for approximately 100–500 g charges under high vacuum or inert gas, with integrated temperature control, programmable pressure and automated evacuation/flushing.
View product detailsProvides controlled induction melting and alloying of metal samples up to approximately 20 g under high vacuum or argon, with a traversing coil for improved homogenization.
View product detailsProduct selection and application support
Tell us about your sample, application and target parameters. The Labsun team will help you select a suitable instrument or solution.
